FOOD CONTAINERS
.
.
.
.
.
.
Production of half-shells for beer kegs.
| Workpiece: | Deep drawn piece with flange |
| Material: | Stainless Steel |
| Performed operation: | Trimming - Outer Ribbing |
| Working cycle: | Semi-Automatic or Automatic, when included in a complete production line |
Production of footrings (simple and stackable) for beer kegs.
ROUND-STRAIGHT FOOTRING
| Workpiece: | Butt-welded rolled ring |
| Material: | Stainless Steel |
| Performed operation: | Bending / Edge Pre-Curling |
| Working cycle: | Semi-Automatic with two place settings to work in sequence both ends |
STOCKABLE FOOTRING
| Workpiece: | Shaped butt-welded rolled ring |
| Material: | Stainless Steel |
| Performed operation: | Bending / simultaneous Pre-Curling of both edges |
| Working cycle: | Semi-Automatic |
Production of bodies for nuclear waste containers.
| Workpiece: | Roll-bended and butt-welded body |
| Material: | Stainless Steel |
| Performed operation: | Trimming - no. 2 Ribbings |
| Working cycle: | Semi-automatic with two place settings to work in sequence both ends |
Production of cylindrical buckets for liquids, consisting of shaped body and bottom end, lockseamed together.
BODY WORKING PROCESS
| Workpiece: | Shaped body with overlapping edges welded with pressure rollers |
| Material: | Galvanized normal steel |
| Performed operation: | Lower edge outward Flanging |
| Working cycle: | Semi-Automatic |
BODY LOCKSEAMING ONTO THE BOTTOM END
| Workpiece: | Shaped outward flanged body with overlapping edges welded with pressure rollers; deep drawn bottom end with blank flange |
| Material: | Galvanized normal steel |
| Performed operation: | Intermediate Ribbings- Pre-Lockseaming - 4-layer Lockseaming - edge Curling |
| Working cycle: | Semi-Automatic |
Production of various components for oil containers, consisting of shaped body, bottom end and cover, lockseamed together, as well as end cap.
TOP CAP WORKING
| Workpiece: | Deep drawn piece with pre-curled blank flange |
| Material: | Stainless Steel |
| Performed operation: | Male piece Threading |
| Working cycle: | Semi-Automatic |
NECK WORKING
| Workpiece: | Deep drawn piece with pre-curled blank flange |
| Material: | Stainless Steel |
| Performed operation: | Edge Semi-Curling - female piece Threading - upper cover Trimming |
| Working cycle: | Semi-Automatic |
BODY LOCKSEAMING ONTO THE COVER
| Workpiece: | Shaped and outward flanged body with butt-welded edges; deep drawn cover with pre-curled blank flange and opening |
| Material: | Stainless Steel |
| Performed operation: | Pre-Lockseaming - 4-layer Lockseaming |
| Working cycle: | Semi-Automatic |
BODY LOCKSEAMING ONTO THE BOTTOM END
| Workpiece: | Outward flanged body with cover and opening on deep drawn bottom end with pre-curled blank flange |
| Material: | Stainless Steel |
| Performed operation: | Pre-Lockseaming - 5-layer Lockseaming |
| Working cycle: | Semi-Automatic |
Production of mixing bowls for kneading machines.
| Workpiece: | Deep drawn piece with flange |
| Material: | Stainless Steel |
| Performed operation: | Trimming - Chamfering - Curling |
| Working cycle: | Semi-Automatic |
Production of rectangular boxes for various materials, consisting of container and lid.
LID
| Workpiece: | Deep drawn piece with flange |
| Material: | Normal Steel or Stainless Steel |
| Performed operation: | Edge Trimming - Braking of scrap into two parts in case workpiece is deep drawn with no flange (when necessary) |
| Working cycle: | Semi-Automatic |
BOX
| Workpiece: | Deep drawn piece with flange |
| Material: | Normal Steel or Stainless Steel |
| Performed operation: | Trimming - Beading |
| Working cycle: | Semi-Automatic |
Production of rectangular tanks with intermediate joint for various liquids, consisting of male and female half-shells.
| Workpiece: | Deep drawn male and female pieces with shaped blank edge |
| Material: | Normal steel |
| Performed operation: | Pre-Lockseaming - 5-layer Lockseaming (sealant coating when necessary) |
| Working cycle: | Semi-Automatic |
Production of rectangular tanks with joint on the base for various liquids, consisting of body and bottom end.
| Workpiece: | Body: deep drawn piece with blank flange; Bottom end: deep drawn piece with pre-curled blank flange |
| Material: | Normal steel |
| Performed operation: | Pre-Lockseaming - 5-layer Lockseaming |
| Working cycle: | Semi-Automatic |
Production of tanks for spray gun bottles with various neck workings.
CURLED NECK
| Workpiece: | Deep drawn piece with narrowed trimmed neck |
| Material: | Aluminium |
| Performed operation: | Edge Deburring - outward Curling |
| Working cycle: | Semi-Automatic |
DOUBLE CURLED NECK
| Workpiece: | Deep drawn piece with narrowed trimmed neck |
| Material: | Aluminium |
| Performed operation: | Edge Deburring - outward Curling - curl Flattening |
| Working cycle: | Semi-Automatic |
THREADED NECK
| Workpiece: | Deep drawn piece with narrowed trimmed neck |
| Material: | Aluminium |
| Performed operation: | Threading |
| Working cycle: | Semi-Automatic |
Via Ponte dei Granatieri, 8
36010 Chiuppano (Vicenza), Italy
R.E.A di VI: 210567
R.I di VI: 08808900156
Cap. Soc: € 5.200.000,00 i.v
