AIR AND SMOKE DUCTS
.
.
.
.
.
.
Production of joints, curves, T, reductions, etc. for ventilation systems to which a sealing gasket is lockseamed.
| Workpiece: | Pipe with overlapped longitudinal joint, welded with rollers; with pre-assembled seal |
| Material: | Galvanized normal steel |
| Performed operation: | Beading / Outward Flanging - Seal Positioning - Seal Lockseaming |
| Working cycle: | Semi-Automatic |
Production of joints, curves, T, reductions, etc. for smoke ducts on which a seat for sealing gasket is obtained.
| Workpiece: | Pipe with longitudinal butt-welded joint |
| Material: | Stainless Steel |
| Performed operation: | Outward Beading / Pre-Curling |
| Working cycle: | Semi-Automatic |
Production of joints, curves, T, reductions, etc. for smoke ducts on which a thread and the seat for sealing gasket are obtained.
| Workpiece: | Pipe with longitudinal butt-welded joint |
| Material: | Stainless Steel |
| Performed operation: | Threading / Stamping, when necessary - Ribbing for seal seat |
| Working cycle: | Semi-Automatic |
Production of curved segments for smoke ducts on which a flange is obtained to form curves of various angles and direction, after assembly of a hose clamp.
| Workpiece: | Pipe with longitudinal butt-welded joint |
| Material: | Normal Steel |
| Performed operation: | Outward Flanging - Edge Turning |
| Working cycle: | Semi-Automatic, with two place settings to work in sequence both ends |
Production of curved segments for smoke ducts on which an outward beaded edge is obtained to form curves of various angles and direction, after assembly of a hose clamp.
| Workpiece: | Pipe with longitudinal butt-welded joint |
| Material: | Stainless Steel |
| Performed operation: | Edge outward Beading |
| Working cycle: | Semi-Automatic, with two place settings to work in sequence both ends |
Via Ponte dei Granatieri, 8
36010 Chiuppano (Vicenza), Italy
R.E.A di VI: 210567
R.I di VI: 08808900156
Cap. Soc: € 5.200.000,00 i.v
