Mechanichal Presses

Nominal force (up to)

20000 kN

Speed (up to)

140 rpm

Stroke (up to)

800 mm

Composite and monolithic mechanical presses are characterised by a high frame stiffness, tested using the Finite Element Method (FEM), and by the precision of the slide guidance system. OMERA range of products provides for single or double connecting rod mechanical presses, with fixed or variable stroke and automatic stroke adjustment. According to the applications and to the pieces to be produced, OMERA develops solutions with kinematics:

  • Eccentric
  • Soft blanking
  • Link drive
  • Servodrive

Frame Stiffness


The press frame and the slide guide are optimized through the Finite Element Method (FEM).

Slide Guiding


Roller guides for a high stiffness and a precise guidance of the slide. OMERA roller guides are designed to allow higher stiffness and an improved load distribution.

Smart Energy Management (FEM)


A Smart Energy Management for the main motors allows energy to be stored in the flywheel while braking, avoiding energy exchanges during the cycle. The SEM improves efficiency, allows motor and drive downsizing and minimizes current peaks.

Quick Die Changing


Available on our whole range of mechanical presses:

  • Lifting rails on the table
  • Movable brackets
  • Automatic die clampers

 

Moving Table / Bolster


OMERA moving bolster is available on our whole range of monolithic and composite mechanical presses for a more precise die adjustment.

 

T- trak and Double moving bolster


T- trak and Double moving bolster by OMERA are used to change the die respectively for large presses and presses lines solutions

 


Via Ponte dei Granatieri, 8
36010 Chiuppano (Vicenza), Italy
R.E.A di VI: 210567
R.I di VI: 08808900156
Cap. Soc: € 5.200.000,00 i.v
Image
Image

Are you interested in our solutions? Contact Us

sviluppo web