Hydraulic Presses OPI.M

Nominal force (up to)

30000 kN

Table dimensions (up to)

5000 x 3000 mm

Stroke (up to)

2000 mm

The monolithic and composite presses are widely used in a vast range of applications in a whole host of different industries involving sheet metal working. The presses can also be supplied complete with dies and automatic feeding systems. The hydraulic presses are typically used in the production of:

  • bottom ends for water heaters and tanks
  • cooker tops
  • domestic appliances
  • drinks containers
  • stainless steel pots and pans
  • pressurised containers
  • gas cylinders
  • fire extinguishers
  • automotive parts


Frame stiffness

Press Frame an guide response optimized by FEM analisys.
Stiffness response measured and certified.

Reliability & Maintenance

Benefits in terms of:

  • Power consumption
  • Low noise
  • Hydraulic block design for easy access and maintenance
  • Cooling units downsizing
  • Improved reliability



  • Complex drawing process management
  • Drawing passive/active ejector/ejectors
  • Lower passive/active blank Holder
  • Upper passive/active blank Holder
  • Drawing lower punch for active reverse drawing
  • Multiple effects machines for multi step integrated dies


Quick die changing

Available on the whole portofolio:

  • Lifting rails on the table
  • Movable brackets
  • Automatic die clampers


Moving Table / Bolster

OMERA moving bolster is available on the whole portfolio for a more precise die regulations.


T- trak and Double moving bolster

T- trak and Double moving bolster by OMERA are used to change the die respectively for large presses and presses lines solutions


Via Ponte dei Granatieri, 8
36010 Chiuppano (Vicenza), Italy
R.E.A di VI: 210567
R.I di VI: 08808900156
Cap. Soc: € 5.200.000,00 i.v

Are you interested in our solutions? Contact Us

sviluppo web